90° Door Swing - Monogram ZISB360D Design Manual With Installation Instructions

Top View
90° DOOR SWING
(optional setting)
Scale 1:1
IMPORTANT NOTE –
FOR DISPENSER MODELS:
Dispenser models are supplied with
two dispenser trims, one to fit framed
panels and one for overlay panels.
Dispenser trim fit to the custom
panel depends on correct panel
thickness. Framed panels must be
1/4" nominal. Overlay panels should
be constructed as shown to accom-
plish a total 1.100" thickness. See
pages 7 and 8 for details.
Design Guide
Refrigerator
Door
5
Frameless Cabinets:
The case trim overlaps
cabinets at the top
and sides.
Therefore, frameless
cabinets may require filler
Case Trim
strips to prevent inter-
ference with cabinet door
swing. The opening must
allow for filler strips.
23-7/8"
From Rear of
Refrigerator
1/4"
1/4"
1/2"
3/4"
1"
1-1/4"
1/2"
3/4"
1"
1-1/4"
1-1/2"
3/4" Overlay
Panel
(Nominal Size)