Default Network Settings - Canon TM-200 Online Manual

Default Network Settings

LAN Connection Defaults
Item
Enable/Disable LAN
Network name (SSID)
Communication mode
Wi-Fi security
IP address (IPv4)
IP address (IPv6)
Set printer name*
Enable/disable IPv6
Enable/disable WSD
Timeout setting
Enable/disable Bonjour Enable
Service name
LPR protocol setting
Wi-Fi DRX setting
Wired LAN DRX setting Enable
("XX" represents alphanumeric characters.)
* Default value depends on printer. To check value, use operation panel.
LAN settings
Wireless Direct Defaults
Item
Network (SSID)/device name
Password
Wi-Fi security
Connection request confirmation Displayed
*1 "ab" is specified at random and "XX" represents last two digits of printer's wireless MAC address.
Default
Wired LAN enabled
BJNPSETUP
Infrastructure
Disable
DHCP
Auto setup
XXXXXXXXXXXX
Enable
Disable
15 minutes
Canon TM-200
Enable
Enable
Default
DIRECT-abXX-TM-200 *1
YYYYYYYYYY *2
WPA2-PSK (AES)
264