Advantek Networks AWN-AP-54MR User Manual page 25

All manuals and user guides at all-guides.com
Wireless Access
Control Mode
MAC Address
Comment
Apply Changes
Reset
Delete Selected
Delete All
Reset
Select the Access Control Mode from the pull-down
menu.
Disable: Select to disable Wireless Access Control
Mode.
Allow Listed: Only the stations shown in the table
can associate with the AP.
Deny Listed: Stations shown in the table won't be
able to associate with the AP.
Enter the MAC Address of a station that is allowed to
access this Access Point.
You may enter up to 20 characters as a remark to
the previous MAC Address.
Press to save the new settings on the screen.
Press to discard the data you have entered since last
time you press Apply Change.
To delete clients from access to this Access Point,
you may firstly check the Select checkbox next to
the MAC address and Comments, and press Delete
Selected.
To delete all the clients from access to this Access
Point, just press Delete All without selecting the
checkbox.
If you have made any selection, press Reset will
22