Status; System - Advantek Networks AWN-AP-54MR User Manual

All manuals and user guides at all-guides.com

Status

In this screen, you can see the current settings and status of this Access
Point. You can change settings by selecting specific tab described in
below.

System

System
Uptime The time period since the device was up.
Firmware Version The current version of the firmware installed in this
device.
Wireless Configuration
Wireless Mode There are four modes supported, Access Point, Client
(Ad-hoc and Infrastructure), WDS Bridge and WDS
repeater. The default mode is Access Point. If you
want to change to bridge mode, please go to
Wireless/WDS Setting to enable the WDS function.
10