Compaq Armada 7400 Reference Manual page 146

PC Card drivers
fail with error
messages
during system
restart.
Network PC
Card does not
work.
Continued
PC Card slots are
disabled.
Necessary drivers are
not installed (turned on).
PC Card is not fully
inserted or is upside
down.
Network PC Card or
driver is not PCMCIA
compliant.
Before a new PC Card
can be used, it may be
necessary to perform an
initial setup procedure.
Follow the PC Card
manufacturer's
instructions for formatting
a hard drive card or
installing PC Card–
specific drivers for a
network card.
To enable the PC Card
slots:
1. Run Computer Setup.
2. Select the System
Features icon.
3. Select the Power
Management box.
4. Select the option to
enable PC Card slots.
Refer to the instructions
that came with the PC
Card or contact the
vendor for information on
installing the correct
drivers.
Ensure the PC Card is
inserted correctly.
Contact your Compaq
authorized dealer,
reseller, or service
provider for a list of PC
Cards tested
successfully in Compaq
PC Card platforms.
Troubleshooting
Continued