Using Multibay Adapters; Inserting A Hard Drive Into The Armada 7300 Hard Drive Multibay Adapter - HP Armada 7300 Reference Manual

Using MultiBay Adapters

Inserting a Hard Drive into the Armada 7300
Hard Drive MultiBay Adapter
Before inserting a hard drive into the computer MultiBay, insert it
into the Armada 7300 Hard Drive MultiBay Adapter. The adapter
is included with an Armada 7300 hard drive option kit and is also
available as a separate option.
IMPORTANT:
read the cautions under "Caring for Removable Drives" earlier in
this chapter.
To insert a hard drive into the Hard Drive MultiBay Adapter:
1. Push the slide tab in the Hard Drive MultiBay Adapter toward
the back of the adapter
2. Hold the hard drive with the connector near the lower edge of
the drive facing the connector inside the adapter
3. Slide the drive toward the connector inside the adapter until it
is seated
Placing a Hard Drive into the Hard Drive MultiBay Adapter
4. Release the adapter slide tab. (The tab returns to its original
position if the drive is seated.)
5. Tuck the hard drive tab inside the adapter.
6. Follow the steps under "Inserting a Drive into the MultiBay."
NOTE:
a hard drive.
6-8 Working with Removable Drives
Before handling a removable drive, be sure you have
.
The computer must be off before inserting or removing
.
.