Table of Contents
Advertisement
2.5.2 Computer Checkup (TEST)
Computer Checkup (TEST) determines whether the various computer components and
devices are recognized by the computer and are functioning properly. You can display,
print, or save the information that Computer Checkup generates.
NOTE: Compaq Utilities are intended for testing only Compaq-supplied components.
Testing non-Compaq components may be inconclusive.
Running Computer Checkup (TEST)
Plug the external power supply into the computer. A low battery condition can
1.
interrupt the program.
Connect a printer if you want to print a log of error messages.
2.
Turn on the external devices that you want to test.
3.
Turn on or restart the computer.
4.
Access Compaq Utilities by pressing F10 when the blinking cursor appears in the
5.
upper-right corner of the display.
Click Computer Checkup
6.
If the list of installed devices is correct, click OK.
If the list is incorrect, ensure that any new devices are installed properly.
Select one of the following from the Test Option menu:
7.
Quick Check Diagnostics
Automatic Diagnostics
Prompted Diagnostics
Follow the instructions on the screen as the devices are tested.
8.
Click Exit Diagnostics
9.
View the Device List.
Exit from this utility.
Troubleshooting 2-9
Advertisement
Table of Contents
