Download Print this page

Honda GX 690RH TXF7 Manual page 41

Advertisement

MAINTENANCE
COMBUSTION CHAMBER CLEANING
Remove the cylinder (page 14-2).
Prepare a cylinder of a thick paper or equivalent
material (1), which diameter is as large as to fit against
the inner wall of the cylinder, and insert the paper into
the cylinder.
Attach the cleaning brush (special tool) (2) to an electric
drill and clean any carbon deposits from the combustion
chamber.
TOOL:
Cleaning brush (2)
• Do not remove valves from the cylinder while
cleaning the combustion chamber.
• Be sure to insert a thick paper into the cylinder to
protect the inner wall of the cylinder during clearing
of the combustion chamber.
• Do not press the cleaning brush with force against
the combustion chamber.
FUEL FILTER REPLACEMENT
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when han-
dling fuel.
• Keep heat, sparks and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
Check the fuel filter (1) for water accumulation or
sediment. If necessary replace it.
Install the commercially available tube clamps (1) on
the fuel tubes (2) on both sides of the fuel filter (3).
Disconnect the fuel tube from the fuel filter to remove
the fuel filter.
Install a new fuel filter with the arrow mark toward the
carburetor side.
Check the connecting parts for any sign of fuel leakage.
3-10
07998-VA20100
(1)
(2)
(3)
(1)
(2)
(1)
(2)

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Gx630rGx660Gx660rGx690Gx690rGx630 ... Show all