Table of Contents
Advertisement
Step 1
Turn off the oven. Wait until the
oven is cold.
Back lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4
Install the glass cover.
TROUBLESHOOTING
WARNING! Refer to Safety chapters.
WHAT TO DO IF...
In any cases not included in this table please
contact with an Authorised Service Centre.
Problem
The oven does not
heat up.
The door gasket is
damaged.
The display shows
"12.00".
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Before you replace the lamp:
Disconnect the oven from the
Check if...
The fuse is blown.
Do not use the oven.
Contact an Author-
ised Service Centre.
There was a power
cut. Set the time of
day.
We recommend that you write the data here:
Step 2
mains.
Problem
The lamp does not
work.
SERVICE DATA
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of
the oven cavity. Do not remove the rating plate from
the oven cavity.
.........................................
.........................................
.........................................
Step 3
Put a cloth on the bottom of
the cavity.
Check if...
The lamp is burnt
out.
21
Advertisement
Table of Contents
