How To Replace: Lamp; Troubleshooting; What To Do If - Zanussi ZOPXX8KN User Manual

TROUBLESHOOTING

12.6 How to replace: Lamp

WARNING!
Risk of electric shock.
The lamp can be hot.
Always hold the halogen lamp with a cloth to prevent grease residue from burning on the lamp.
Step 1
Turn off the oven. Wait until
the oven is cold.
Back lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.
13. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.

13.1 What to do if...

The appliance does not turn on or does not heat up
Possible cause
The appliance is not connected to an electrical
supply or it is connected incorrectly.
The clock is not set.
70/160
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
Check if the appliance is correctly connected to
the electrical supply.
Refer to the connection diagram.
Set the clock, for details refer to Clock func‐
tions chapter, How to set: Clock functions.
Put a cloth on the bottom of
the cavity.
Remedy
Step 3