Battery Information; Replacing The Battery; Battery Disposal - Avital 4105L Owner's Manual

Battery Information

The remote control* is powered by two 3V, CR2016 batteries. When
the battery begins to weaken, operating range is reduced and the LED
on the remote control dims.
* Some remote controls are powered using a single coin cell battery
(CR-2032), so please verify which type and quantity is used before
replacing.

Replacing the Battery

Use a small flat blade (flat-head) screwdriver and insert it into the
1.
slot located along the bottom of the remote, near the key ring.
Carefully pry open the case.
Remove the old batteries from the holding clip. Orient the new
2.
batteries for the correct polarity and insert into the holding clip.
3. Reposition the case parts, then snap together by pressing firmly
and evenly on the front and back.

Battery Disposal

Directed cares about the environment. If you need to dispose
of the battery, please do so in accordance with your munici-
pal requirements for battery disposal.
14
© 2016 Directed. All rights reserved.