Installation Of Optional Card And Unit - Panasonic KX-T206 Installation Manual

Electronic modular switching system
Hide thumbs Also See for KX-T206:
Table of Contents

Advertisement

Installation of Optional Card and Unit

Doorphone (KX-T30865) Connection
SYSTEM
Notes
• The doorphone adaptor is not required for KX-T206.
• To avoid howling, you must assign all extensions as "DISABLE" in the "#06/#76 Doorphone
Assignment (Day/Night)" program when you do not connect a doorphone.
• If howling occurs while using the doorphone feature, check the wiring.
• You can use cable holders to fix the wires.
DISA Card (KX-T20691) Connection
1. Disconnect the AC cord from the system.
2. Loosen the screws and remove the cover.
The DISA feature allows an outside caller to have direct access to intercom calls. System pro-
gramming is required. See "#10 OGM Recording" on page 22 and "#24 Call Incoming Mode
Selection" on page 26.
Keep the following conditions in mind:
• When a caller enters the second digit of an extension number (1 through 6) during the mes-
sage, he/she can reach the extension directly.
• If the call is not received, the assigned extensions will ring. See "#04/#74 CO1 Ringing
Assignment (Day/Night), "#05/#75 CO2 Ringing Assignment (Day/Night)" on page 20 and
"#60 DISA Ringing Time" on page 28.
• If the caller enters 0, the assigned extensions can receive his/her call. See "#04/#74 CO1
Ringing Assignment (Day/Night), "#05/#75 CO2 Ringing Assignment (Day/Night)" on page
20.
• If the caller enters 7, 8 or 9, or enters nothing, extension 21 will receive his/her call.
• Any calls from a rotary phone will be received by extension 21.
DPH
EXTN.
EXTN.
5
6
EXTN.
EXTN.
3
4
EXTN.
EXTN.
1
2
CO 2
DPH
CO 1
GROUND
2-conductor wiring cord
KX-T30865
3. Attach the DISA card to the marked connectors.
4. Replace the cover and secure the screws.
5. Connect the AC cord again.
T
R
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents