Advertisement
FX Amplifier • Operating Manual
Introduction
FX IP connected power amplifiers have been
designed to provide configurable, consistent
and reliable high performance audio power
amplification for residential, commercial
and entertainment applications. Please
read this manual fully before installing and
using an amplifier. If you have any questions
regarding amplifier configuration, installation
or operation please contact the appropriate
customer support portal.
Table of Contents
1 -
4 - AC Mains and Network Configuration
8 - Input and Speaker Connections
9 - Operation
10 - Signal Flow and Panel Diagrams
12 - Warranty
Overview
1. Amplifier Overview
1.1 Model Range
FX 60.2
The FX 60.2 amplifier is a half rack width, 1U
format power amplifier that can drive both
conventional low impedance (Low-Z, 4Ω to
16Ω) loudspeakers and high impedance (Hi-Z,
70V/100V) transformer coupled loudspeakers.
The FX 60.2 provides four analog inputs, one
stereo S/PDIF digital input, and two outputs
(Low-Z mode) or one output (Hi-Z mode). It is
capable of a maximum output of 60 Watts per
channel into Low-Z loads or 120 Watts into Hi-Z
loads. The FX 60.2 also incorporates automatic
power sharing technology that enables 120
Watts to be shared proportionately as required
between the two outputs in Low-Z mode.
FX 125.2
The FX 125.2 amplifier is a half rack width,
1U format power amplifier that can drive both
conventional low impedance (Low-Z, 4Ω to
16Ω) loudspeakers and high impedance (Hi-Z,
70V/100V) transformer coupled loudspeakers.
The FX 125.2 provides four analog inputs,
one stereo S/PDIF digital input, and two
outputs (Low-Z mode) or one output (Hi-Z
mode). It is capable of a maximum output
of 125 Watts per channel into Low-Z loads
or 250 Watts into Hi-Z loads. The FX 125.2
also incorporates automatic power sharing
technology that enables 250 Watts to be
shared proportionately as required across the
two outputs in Low-Z mode.
FX 60.4
The FX 60.4 amplifier is a half rack width, 1U
format power amplifier that can drive both
conventional low impedance (Low-Z, 4Ω to
16Ω) loudspeakers and high impedance (Hi-Z,
70V/100V) transformer coupled loudspeakers.
The FX 60.4 provides four analog inputs, one
stereo S/PDIF digital input, and four outputs
(Low-Z mode) or two outputs (Hi-Z mode). It is
capable of a maximum output of 60 Watts per
channel into Low-Z loads or 125 Watts into Hi-Z
loads. The FX 60.4 also incorporates automatic
power sharing technology that enables 250
Watts to be shared proportionately as required
across the four outputs in Low-Z mode and the
two outputs in Hi-Z mode.
FX 125.4
The FX 125.4 amplifier is a half rack width,
1U format power amplifier that can drive both
conventional low impedance (Low-Z, 4Ω to
16Ω) loudspeakers and high impedance (Hi-Z,
70V/100V) transformer coupled loudspeakers.
The FX 125.4 provides four analog inputs, one
stereo S/PDIF digital input, and four outputs
(Low-Z mode) or two outputs (Hi-Z mode). It
is capable of a maximum output of 125 Watts
per channel into Low-Z loads or 250 Watts
per channel into Hi-Z loads. The FX 125.4
also incorporates automatic power sharing
technology that enables 250 Watts to be
shared proportionately as required across each
output pair in Low-Z mode and the two outputs
in Hi-Z mode.
5
Advertisement
