Advertisement
FX Amplifier • Operating Manual
Settings Menu
System Information
Device
Backup & Restore
Speaker Library
Power Management
GPIO
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
LAN
WiFi
Configuration Specifications (continued)
Installation site info
Device info, device locator, firmware update
Backup/restore device settings, restart device, factory reset
Create/Edit/Import speaker libraries
Set Auto-On options, change Standby timer, change Mute timer
Pin assignment options
Ground only, for 12V trigger and standby/mute input reference
Off, Input for Standby (NO), Standby (NC), Mute (NO), or Mute (NC)
Ground only, for Voltage Control and Trigger Out reference
Off, Remote Volume Control
Off, Remote Volume Control
Off, Volume Control, 12V Trigger Input (12V trigger input requires Trigger-Mode selected in Power Management section)
Off, Remote Volume Control, 12V Trigger Out
3.3V only (used for remote GPIO volume control)
Set LAN network mode to DHCP or Static IP. The wired LAN default static IP address is 192.168.64.100
WiFi ON/OFF, Disable WiFi on LAN connection, WiFi Disable timer, set WiFi mode to Access Point (hot spot) or Client.
The FX amplifier's WiFi access point (hotspot) IP address is 192.168.4.1, default password is "password"
21
Advertisement
