Section 4 - Connecting to a Wireless Network
Configuring Wireless Encryption
It is recommended to enable wireless encryption (WEP/WPA/WPA2) on your wireless router or access point before configuring your wireless adapter.
If you are joining an existing network, you will need to know the security key or passphrase being used.
1. Open the Windows
Vista
Wireless Utility by right-clicking on the wireless computer
®
™
icon in your system tray (lower right corner of screen). Select Connect to a network.
2. Highlight the wireless network (SSID) you would like to connect to and click Connect.
dlink_DWR-920_xxxx
D-Link DWR-920 User Manual
73