Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ryobi RLM18X33S40
Summary of Contents for Ryobi RLM18X33S40
- Page 1 ORIGINAL INSTRUCTIONS Cordless Lawn Mower RLM18X33S40 OLM1833S...
- Page 2 Important! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modification.
-
Page 3: Intended Use
Safety, performance, and dependability have operator. Children should be adequately been given top priority in the design of your supervised to ensure they do not play with cordless lawn mower. the product. Stay alert, watch what you are doing, INTENDED USE and use common sense when operating the product. -
Page 4: Lawn Mower Safety Warnings
is responsible for accidents or hazards Do not place battery products or their occurring to other people or their property. batteries near fire or heat. This increases the risk of explosion and possibly injury. Tragic accidents can occur if the operator is not alert to the presence of children. - Page 5 the grass discharge chute is exposed before clearing blockages or unclogging and is not protected by the grass catcher discharge chute and grass discharge chute cover. before checking, cleaning, or working on hands and feet of all persons are not the product clear of the cutting enclosure.
-
Page 6: General Mowing Tips
does not work, recharge the battery. TRANSPORTATION AND STORAGE NOTE: The battery pack LED indicator will Stop the product, remove the isolator key not work if the battery protection feature has and the battery. Make sure that all moving caused the battery pack to stop powering the parts have come to a complete stop. -
Page 7: Clearing Blockages
The blades are sharp and the blockage WARNING itself could be a sharp object. Servicing requires extreme care Remove the grass catcher, check for and knowledge and should be performed only by carefully clear obstructions. Check the grass discharge chute for bring the product to an authorised service blockages and carefully clear. -
Page 8: What's In The Box
Check to ensure the tubes are WHAT’S IN THE BOX properly inserted especially at RLM18X33S40/OLM1833S the highest level. The handle could slip out of the holes if not Lawn mower x1 properly inserted and locked. -
Page 9: Symbols In This Manual
CAUTION (Without safety alert symbol) Indicates a situation that may result in property damage. SYMBOLS IN THIS MANUAL Parts or accessories sold separately Keep hands away from blades Note Warning Stop the product. - Page 10 UNPACKING RLM18X33S40 *For blade change 13mm...
- Page 11 UNPACKING OLM1833S *For blade change 13mm...
- Page 12 KNOW YOUR PRODUCT Handle Grass catcher On/off trigger Rear wheel Start button 10. Height adjustment lever Motor control cable Front wheel Motor control cable retainer 12. Isolator key Battery door 13. Battery Grass catcher full indicator 14. Charger...
- Page 13 GETTING STARTED GETTING STARTED GETTING STARTED Personal protective equipment (PPE) Good quality personal protective equipment, as used by professionals, will help reduce the risk of injury to the operator.
- Page 15 OVERVIEW Safety and best practices p.15 Easy edge Cutting height adjustment p.16 p.16...
- Page 16 OVERVIEW Replacing the blade Cleaning p.17 p.19 Emptying the grass catcher Storage p.20 p.21...
- Page 17 OPERATION Safety and best practices WARNING: Avoid holes, ruts, bumps, rocks, property stakes, or other hidden objects. Uneven terrain could cause a slip-and-fall accident.
- Page 18 OPERATION Easy edge NOTE: Grass comb pulls grass towards the blade when the product is running along a wall. Cutting height adjustment...
- Page 19 OPERATION Replacing the blade NOTE: Use a wood chock to stop the blade from spinning during loosening and tightening.
- Page 20 OPERATION Blade bolt tightening torque (13.5~20.5 N.m)
- Page 21 MAINTENANCE Cleaning WARNING: After each use, clean the product with a soft, dry cloth. Do not use water when cleaning the product.
- Page 22 MAINTENANCE Emptying the grass catcher NOTE: grass catcher is full.
- Page 23 STORAGE Storage...
- Page 24 STORAGE...
-
Page 25: Product Specifications
BCL14181H / BCL14183H / RC18150U Compatible / RC18120 / BCS618G / RC18627U / charger RC18115 Compatible charger for in- BCL1418IV vehicle charging via 12V DC outlets REPLACEMENT PART Blade RAC431 (682072) (Replacement blades can be ordered through Ryobi Customer Service: 1300 361 505) - Page 28 Imported by: Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Melbourne, Australia Techtronic Industries N.Z. Limited 2 Landing Drive, Mangere Auckland, 2022, New Zealand 099116025001-01...