Universal Remote System Operation; Using Universal Remote; Erasing Universal Remote Buttons; Reprogramming A Single Universal Remote Button - Chevrolet 2011 Traverse Owner's Manual
Chevrolet 2011 traverse automobile owner's manual
Hide thumbs
Also See for 2011 Traverse:
- Owner's manual (452 pages) ,
- Getting to know manual (13 pages) ,
- Navigation manual (78 pages)
Table of Contents
Advertisement
5-52
Instruments and Controls
Universal Remote System
Operation
Using Universal Remote
Press and hold the appropriate
Universal Remote button for at least
half of a second. The indicator light
will come on while the signal is
being transmitted.
Erasing Universal Remote
Buttons
All programmed buttons should be
erased when the vehicle is sold or
the lease ends.
To erase all programmed buttons on
the Universal Remote device:
1. Press and hold down the two
outside buttons until the
indicator light begins to flash,
after 20 seconds.
2. Release both buttons.
Reprogramming a Single
Universal Remote Button
To reprogram any of the three
Universal Remote buttons, repeat
the programming instructions earlier
in this section, beginning with
Step 2.
For help or information on the
Universal Home Remote System,
call the customer assistance phone
number under
.
Advertisement
Table of Contents
