Chamberlain RSW12U Installation Manual page 50

MISCELLANEOUS
POST-MOUNTING PLATE
For post-mounting models CSW24VDC and
RSW12VDC commercial swing operators (also
CSW200 commercial swing operator). Posts not
included.
Model MPEL
REMOTE ANTENNA EXTENSION KIT
The remote antenna extension kit allows the
antenna to be remotely installed.
Model 86LM
COMMERCIAL ACCESS CONTROL RECEIVER
Access control receiver for up to 1,000 devices
(any combination of remote controls and wireless
keyless entries).
Model STAR1000
PLUG-IN LOOP DETECTOR
Conveniently plugs into existing control board.
Model LOOPDETLM
LOOP DETECTOR
Low power loop detectors mounted and wired
separately inside control box. LiftMaster low power
accessory.
Model LD7LP
VEHICLE SENSING PROBE
The vehicle sensing probe is buried in the ground
and can detect a car as it approaches and will then
open the gate.
Model CP3
SOLAR PANEL KIT
This kit is to replace or add a solar panel to the
operator application. 60W maximum for 24 Vdc
operators and 30W maximum for 12 Vdc
operators. Requires a 33AH battery harness.
Models SOLPNL10W12V (10 Watt, 12V),
SP10W12V* (10 Watt, 12V) and SP20W12V*
(20 Watt, 12V)
MAGNETIC GATE LOCK
Outdoor magnetic lock, transformer, junction box,
mounting plate and hardware. Not for use with
Solar Applications. Must be powered separately.
Model MG1300
HEATER
The heater keeps the gearbox and batteries at a
suitable temperature when the outside temperature
is below -4°F. The thermostat MUST be set
between 45°F and 60°F to ensure proper gate
operation. The heater can be powered by 110 to
250 Vac.
Model HTR
* Available end of 2015
ACCESSORIES
MISCELLANEOUS
BATTERIES
Gate access system batteries replace or upgrade the gate operator
batteries. One 12 Vdc battery is required for each gate operator. Do not
mix 7AH and 33AH batteries within a gate operator.
48
®
LIFTMASTER INTERNET GATEWAY
Internet enabled accessory which connects to the
computer and allows you to monitor and control
gate operators and lighting accessories enabled by
MyQ ® technology.
Model 828LM
EXPANSION BOARD
Additional programming features including external
loops, plug-in loops, auxiliary relays, and inputs for
additional controls and entrapment protection
devices.
Model K1D8387-1CC
WIRE HARNESS
Between main control board and expansion board.
Model K94- 34778
WIRELESS COMMERCIAL KEYPAD
Durable wireless keypad with blue LED backlight
metal keypad, zinc-alloy metal front cover and 5
year 9V lithium battery. Security+ 2.0
Model KPW250
7AH BATTERIES
Standard 7 AMP-Hour Battery, 12 Vdc, to replace
original battery provided with operator. Reuse
existing harnesses.
Models 29-NP712 (1) and K74-30762 (2)
33AH BATTERIES
Upgrade 33 AMP-Hour Battery, 12 Vdc. Ideal for
solar applications.
Model A12330SGLPK
BATTERY TRAY
For use with 33AH batteries.
Model K10-36183
33AH BATTERY HARNESS
Required for 33AH applications.
Model K94-37236
® compatible.