Philips Saeco Incanto HD8919/51 User Manual page 19

English
Brewing milk-based coffee beverages and milk froth
Special drinks
How to select special drinks
Dispensing hot water
Pull out the milk froth dispensing spout completely to the right to froth
dispensing position.
Note: If the milk froth dispensing spout is not pulled out fully, the milk
carafe does not froth milk properly.
Place a cup under the open milk froth dispensing spout.
Choose your milk-based beverage.
-
Press the CAPPUCCINO button to brew a cappuccino.
-
Press the LATTE MACCHIATO button to brew a latte macchiato.
-
Press the MENU button, choose 'Drinks' and scroll down through the
drinks to select milk froth.
-
The machine reminds you have to install the milk carafe and pull out
the milk froth dispensing spout.
The machine first dispenses a preset quantity of frothed milk into the cup
or glass and then dispenses a preset quantity of coffee.
-
To stop dispensing milk or coffee, press the OK button.
After brewing milk-based coffee beverages, the display asks you if you
want to perform a quick clean of the milk carafe spout. You have
seconds to perform the quick clean.You can perform the quick clean
while leaving the milk inside the milk carafe. Remove the cup with the
beverage and place a container under the milk froth dispensing spout.
Press the OK button twice to confirm that you want to quick clean, or
press the ESC button to perform the quick clean later. It is recommended
to perform quick clean at least once a day, see chapter 'Cleaning the milk
carafe'.
Press the MENU button and select 'Drinks'.
Press the OK button to confirm.
Scroll the menu and select the desired beverage.
Inserting and removing the hot water dispensing spout
To insert the hot water dispensing spout: