Panasonic Lumix DMC-GF8 Operating Instructions Manual page 283

11. Using the Wi-Fi function
Sending an image each time a recording is made ([Send Images While
Recording])
1
Select the menu.
> [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] >
MENU
[Send Images While Recording] > [Cloud Sync. Service]
2
Select [Via Network], and connect.
3
Check the send settings, and select [Set].
•
To change the send setting, press [DISP.].
4
Take pictures.
•
To change the setting or disconnect, press [Wi-Fi].
You cannot change the settings while sending pictures. Wait until sending is complete.
(You can also terminate the connection by performing the following operations:
>
MENU
Select and send the images ([Send Images Stored in the Camera])
1
Select the menu.
> [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] >
MENU
[Send Images Stored in the Camera] > [Cloud Sync. Service]
2
Select [Via Network], and connect.
3
Check the send settings, and select [Set].
•
To change the send setting, press [DISP.].
4
Select [Single Select] or [Multi Select].
[Single Select] setting
1 Select the picture.
2 Select [Set].
[Multi Select] setting
1 Select the picture. (repeat)
•
The setting is cancelled when the picture is selected
again.
2 Select [OK].
•
The number of pictures that can be sent by [Multi Select]
is limited.
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
•
To change the send settings on a screen that is displayed after the image has been sent,
press [DISP.]. To terminate the connection, select [Exit].
(P53)
> >
[Setup] [Wi-Fi] [Wi-Fi Function]
(P53)
(P290)
(P297)
(P252)
>
[Yes])
(P290)
(P297)
283