11. Using the Wi-Fi function
Taking images via a smartphone/tablet (remote recording)
1
Connect to a smartphone.
2
Operate the smartphone.
1 Select [
2 Record an image.
•
The recorded images are saved in the camera.
•
Some settings are not available.
•
When a high ambient temperature, continuous recording
or other conditions cause the camera to overheat, the
following restrictions will occur to protect the camera.
Wait until the camera cools down.
–
Continuous recording, motion picture recording, and
the Wi-Fi connection will be temporarily disabled.
–
If you continue recording even when [
on the screen, a message will be displayed and the
camera will turn off automatically.
Not available in these cases:
•
In the following case, remote recording does not work:
–
Panorama Shot Mode
–
Self Shot Mode
–
When [Snap Movie] is set to [ON]
Taking a picture while jumping
∫
When you hold your smartphone and jump, the camera's shutter can be released
automatically as the smartphone detects the peak of the jump. This function is convenient
for taking a picture while jumping.
Operate the smartphone.
[
] > [Live Control Settings] > [Jump Snap] > Select the sensitivity.
•
[
] will be displayed on the remote recording screen of the smartphone.
•
We recommend that you take test pictures to determine the camera's angle and how hard you
jump and to make any desired adjustments.
•
For details, refer to the help section in the "Image App" menu.
(P256)
].
] is flashing
261
A