Table of Contents
Advertisement
Setting Up Controller Environment
2-4. Sleep
■ If no joystick or button input is detected for a set
duration, the LCD screen turns itself off and enters
Sleep mode.
2-5. Buzzer
■ Turns the sound of controller buttons on or off.
2-6. Terminate
■ To prevent the attenuation of communication signals
between the camera and controller, the controller's
termination option must be ON if it is located farthest from
the camera and controller communication loop. If the
controller is in the middle of the camera and controller
communication loop, turn the termination option off.
2-7. Joystick's Serial Command Transfer Cycle
■ Select a PTZ serial command transfer cycle for using
the joystick. Shortening the transfer cycle increases
the response speed of the camera.
Notes
• Shortening the joystick's serial command transfer cycle may cause certain camera models to not
process commands properly. To prevent and resolve such malfunctions, extend the transfer cycle.
16
PTZ CONTROLLER
User Guide
Setting Up Controller Environment
2-8. Password
■ Enables changing the controller password.
2-9. Factory Set
■ Resets the controller's current settings to the factory
release default values and optimizes the joystick
calibration.
PTZ CONTROLLER
17
User Guide
Advertisement
Table of Contents
