Table of Contents
Advertisement
No Video (Tuner DTV)
„
N Refer to the next page to check the location such a CN201 or IC201 SVC Manual mentioned.
Symptom
-
-
Major
-
checkpoints
-
Caution
Make sure to disconnect the power before working on the PD board.
1
2
Diagnostics
Caution
Make sure to disconnect the power before working on the IP board.
Genoa-P
Audio is normal but no picture is displayed on the screen.
Check the DTV source.
Check the Tuner, Check the Valencia.
This may happen when the LVDS cable connecting the Main Board and the Panel is
disconnected.
Power indicator LED is off.
Lamp(Backlight) on, no video ?
Yes
Check the RF source and
check the connection of RF cable ?
Yes
Does the signal appear at
pin10, 11 of TU701_HN?
Yes
Does the digital data appear at
pin 14~42 of CN1601?
Yes
Check the LVDS cable?
Check the T-con board?
Replace the LCD panel?
No
Check a set in the 'Stand-by mode'.
No
Input the RF source properly.
No
Change the TU701_HN or
the main PCB assembly.
No
Change the IC1001 or
the main PCB assembly.
No
Please, contact Tech support.
4. Troubleshooting
4-15
Advertisement
Table of Contents
