Table of Contents
Advertisement
Dehumidification Mode
In rainy season or high humidity climate, it is
possible to operate simultaneously
dehumidifier and cooling mode to remove
humidity effectively.
1
Press
button to turn on the indoor.
2
Press
button to select dehumidification
mode.
- Room temperature will be displayed after
desired temperature is indicated at
display section for about 5 seconds.
Power Cooling Mode
Strong cooling will be conducted in short time.
1
Press
button to turn on the indoor.
2
Press
button to operate power cooling
mode.
- When power cooling button is pressed
during cooling/dehumidification mode,
power cooling will be operated.
In power cooling mode, desired
temperature is set to 18°C and the
horizontal louver is fixed at the highest
position.
Fan Mode
1
Press
button to turn on the indoor unit.
2
Press
button to circulate indoor air.
- When canceling operation, press
button once more.
- During fan mode, outdoor fan and
compressor will not be operated.
- During fan mode, indoor unit turns on the
fan mode lamp, room temperature lamp,
and fan speed lamp of its display panel.
OPERATING INSTRUCTIONS
Simple Reservation
Turning ON reservation mode
This function is able to turn on unit after a
setting time.
1
When the unit is turned off, adjust desired
setting time with
button.
- Up to the maximum of 24 hours can be
selected.
Turning OFF reservation mode
This function is able to turn off unit after a
setting time.
1
When the unit is turned on, adjust desired
setting time with
button.
- Up to the maximum of 7 hours can be
selected.
NOTE
!
After performing the setting, if corresponded
setting button is pressed once, remaining
setting time will be displayed, and if it is
pressed once again, corresponded setting
function will be cancelled.
(same function as
ON
OFF
Remaining setting time will be displayed with
the unit of 1 hour.
13
)
Advertisement
Table of Contents
