Table of Contents
Advertisement
Model No. PETL98717.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
CUSTOMER SERVICE
UNITED KINGDOM
Call: 0330 123 1045
From Ireland: 053 92 36102
Website: www.iconsupport.eu
E-mail: csuk@iconeurope.com
Write:
ICON Health & Fitness, Ltd.
Unit 4, Westgate Court
Silkwood Park
OSSETT
WF5 9TT
UNITED KINGDOM
AUSTRALIA
Call: 1800 993 770
E-mail: australiacc@iconfitness.com
Write:
ICON Health & Fitness
PO Box 635
WINSTON HILLS NSW 2153
AUSTRALIA
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
www.iconeurope.com
Advertisement
Table of Contents
Related Manuals for Pro-Form POWER 795i
Summary of Contents for Pro-Form POWER 795i
- Page 1 Model No. PETL98717.0 Serial No. USER’S MANUAL Write the serial number in the space above for reference. Serial Number Decal CUSTOMER SERVICE UNITED KINGDOM Call: 0330 123 1045 From Ireland: 053 92 36102 Website: www.iconsupport.eu E-mail: csuk@iconeurope.com Write: ICON Health & Fitness, Ltd. Unit 4, Westgate Court Silkwood Park OSSETT...
-
Page 2: Table Of Contents
TABLE OF CONTENTS WARNING DECAL PLACEMENT ............. . .2 IMPORTANT PRECAUTIONS . -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product. - Page 4 21. The treadmill is capable of high speeds. frame securely in the storage position. Do Adjust the speed in small increments to not operate the treadmill while it is folded. avoid sudden jumps in speed. 26. Do not change the incline of the treadmill by 22.
-
Page 5: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the new PROFORM POWER manual. To help us assist you, note the product model ® 795 I treadmill. The POWER 795 I treadmill provides number and serial number before contacting us. The an impressive selection of features designed to make model number and the location of the serial number your workouts at home more effective and enjoyable. -
Page 6: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. -
Page 7: Assembly
ASSEMBLY • Assembly requires two persons. • To identify small parts, see page 6. • Place all parts in a cleared area and remove the • Assembly requires the following tools: packing materials. Do not dispose of the packing the included hex keys materials until you finish all assembly steps. - Page 8 2. Make sure that the power cord is unplugged. Remove the tie securing the Upright Wire (81) to the front of the Base (6). Next, identify the Right Upright (90). Have a second person hold the Right Upright near the Base (6).
- Page 9 4. Hold the Right Upright (90) against the Base (6). Make sure not to pinch the Upright Wire (81). Attach the Right Upright (90) with two 3/8" x 2 3/8" Screws (7), a 3/8" x 1 1/4" Screw (63), a 3/8" x 1 3/4" Screw (62), and four 3/8" Star Washers (13) as shown;...
- Page 10 6. If there are two screws (E) preattached inside each Handrail (84), remove and discard the screws. Attach a Handrail (84) to the Right Upright (90) with two 5/16" x 3" Screws (28) and two 5/16" Star Washers (11); start both Screws, and then tighten them.
- Page 11 8. IMPORTANT: To avoid damaging the Pulse Crossbar (31), do not use power tools and do not overtighten the #10 x 1 1/4" Screws (9). Orient the Pulse Crossbar (31) as shown. Attach the Pulse Crossbar to the Handrails (84) with four #10 x 1 1/4"...
- Page 12 10. Set the console assembly (G) on the Handrails (84). Make sure that no wires are pinched. Attach the console assembly (G) to the brack- ets on the Handrails (84) with four 1/4" x 1/2" Screws (4); do not tighten the Screws yet. Pull the tie (N) tight against the Upright Wire (81) and cut off the end of the tie.
- Page 13 12. Carefully slide the Upright Crossbar (18) between the Left and Right Uprights (89, 90). Attach the Upright Crossbar with the four 5/16" x 3/4" Screws (8) that you removed in step 5 and four 5/16" Star Washers (11); start all four Screws, and then tighten them.
- Page 14 14. Remove the 5/16" Nut (34) and the 5/16" x 1 3/4" Bolt (23) from the bracket on the Base (6). Next, orient the Storage Latch (26) as shown. Attach the lower end of the Storage Latch (26) to the bracket on the Base (6) with the 5/16" x 1 3/4"...
- Page 15 16. Firmly tighten the four 3/8" x 2 3/8" Screws (7), the two 3/8" x 1 3/4" Screws (62), and the two 3/8" x 1 1/4" Screws (63). Next, set the Left Inner Base Cover (50) onto the lower end of the Left Upright (89). Slide the Left Base Cover (82) downward and press it onto the Left Inner Base Cover.
-
Page 16: How To Use The Treadmill
HOW TO USE THE TREADMILL HOW TO PLUG IN THE POWER CORD Follow the steps below to plug in the power cord. This product must be earthed. If it should malfunc- 1. Plug the indicated end of the power cord into the tion or break down, earthing provides a path of least socket on the treadmill. - Page 17 CONSOLE DIAGRAM FEATURES OF THE CONSOLE To turn on the power, see page 18. To use the man- ual mode, see page 18. To use an onboard workout, see page 20. To connect your tablet to the console, The treadmill console offers a selection of features see page 21.
- Page 18 HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before you turn on the power. If you do See HOW TO TURN ON THE POWER at the left.
- Page 19 5. Follow your progress with the displays. As you exercise, the workout intensity bar will indicate the approximate intensity level of your As you walk or run on the treadmill, the display can exercise. show the following workout information: • The elapsed time •...
- Page 20 To measure your heart rate, stand on the foot HOW TO USE AN ONBOARD WORKOUT rails and hold the pulse bar with your palms on the metal contacts; avoid moving your hands. When 1. Insert the key into the console. your pulse is detected, a heart symbol in the calorie display will flash each time your heart beats, one See HOW TO TURN ON THE POWER on page 18.
- Page 21 HOW TO CONNECT YOUR TABLET TO THE The workout will continue in this way until the last segment of the profile flashes in the display and the CONSOLE last segment ends. The walking belt will then slow to a stop. The console supports BLUETOOTH connections to tablets via the iFit Bluetooth Tablet app and to compat- Note: The calorie goal is an estimate of the...
- Page 22 5. Disconnect your tablet from the console if HOW TO CONNECT YOUR HEART RATE MONITOR desired. TO THE CONSOLE To disconnect your tablet from the console, first The console is compatible with all BLUETOOTH Smart select the disconnect option in the iFit Bluetooth heart rate monitors.
- Page 23 THE SETTINGS MODE HOW TO USE THE TABLET HOLDER The console features a settings mode that keeps track IMPORTANT: The tablet holder is designed for use with most full-size tablets. Do not place any other of treadmill information and allows you to personalize electronic device or object in the tablet holder.
-
Page 24: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to zero before you fold the treadmill. Then, remove left. -
Page 25: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE SYMPTOM: The power turns off during use Regular maintenance is important for optimal per- a. Check the power switch (see drawing c at the left). formance and to reduce wear. Inspect and properly If the switch has tripped, wait for five minutes and tighten all parts each time the treadmill is used. - Page 26 SYMPTOM: The walking belt slows when walked on Next, locate the Reed Switch (101) and the Magnet (103) on the left side of the Pulley (49). Turn the Pulley until the Magnet is aligned with the Reed a. If an extension cord is needed, use only a 3-con- Switch.
- Page 27 SYMPTOM: The walking belt is off-center SYMPTOM: The tablet holder does not stay in place a. IMPORTANT: The walking belt should be cen- a. Rotate the tablet holder backwards. Then, tighten tered between the foot rails; if the walking belt the indicated screw slightly until the tablet holder rubs against the foot rails, the walking belt may stays in place when it is rotated to the desired...
-
Page 28: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. - Page 29 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch —never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
-
Page 30: Part List
PART LIST Model No. PETL98717.0 R0217B Key No. Qty. Description Key No. Qty. Description #8 x 5/8" Screw Right Inner Base Cover #8 x 3/4" Screw 3/8" Plastic Bushing Base Pad 1/4" x 1 1/4" Screw 1/4" x 1/2" Screw Drive Motor #10 Star Washer Motor Belt... - Page 31 Key No. Qty. Description Key No. Qty. Description Reed Switch 3/16" Washer Clamp Motor Washer Magnet Hood Accent Motor Bushing #8 x 1/2" Machine Screw Filter #8 Nut Motor Isolator – User’s Manual Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual.
-
Page 32: Exploded Drawing
EXPLODED DRAWING A Model No. PETL98717.0 R0217B... - Page 33 EXPLODED DRAWING B Model No. PETL98717.0 R0217B...
- Page 34 EXPLODED DRAWING C Model No. PETL98717.0 R0217B...
- Page 35 EXPLODED DRAWING D Model No. PETL98717.0 R0217B 66 2...
-
Page 36: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...