Brother TD-2120N TD-2130N TD-2120NW User Manual page 82

Chapter 10
Key Parameter
Setup Set Temp
(admin
Time
(Continu
1
key)
ed)
(Continu
ed)
Security Disable Edit On/Off
Lock
Settings
Admin
Password
Configuration
1
[ ] (admin key) can be accessed only when touch panel A (basic control panel) is set.
2
This function is available with firmware version 1.04 or later.
The newest version can be downloaded from the support website (Brother Solutions Center).
http://support.brother.com/
NOTE
• Some settings may differ depending on the firmware (printer software).
• If you want to reset the settings, use [Device settings] in the "Printer Setting Tool" to return
all settings to their factory defaults. For details, see Device Settings on page 34.
Setting the Time and Date
Adjust the clock to the current time and date. This time and date is displayed in the main screen.
a
Press [ ] (admin key).
b
Press [b], select [Setup], and then press [OK].
c
Press [b], select [Set Clock], and then press [OK]. The clock setting screen appears.
d
Press the number keys to specify the last two digits of the year, two digits for the month and
two digits for the day.
For December 1, 2013, press [1] [3] [1] [2] [0] [1].
76
Settings
Default Time/Cont From
2 Last
On/Off
On/Off
Enter Password:
**** (4 digits)
Printer/ProgVer/
FontVer/Memory
Description
When directly entering the
date/time to be printed, select
whether or not the entered
date/time remains set after the
copies are printed.
This setting is applied until the
printer is turned off.
Select whether or not label
layouts can be edited.
Allow or disable setting changes
for [ ] (settings key).
Set password access for [
(admin key).
Type in the 4-digit password.
Displays the model name,
firmware version, font version
and amount of built-in memory.
]
10