Removing And Replacing The Drawer - Electrolux EI30GF45QSH Use And Care Manual

Gas slide-in range
Table of Contents

Advertisement

42
Care and Cleaning
Removing and Replacing the
Drawer
To Remove the Drawer:
1. Open the drawer to the fully opened position.
2. Locate glide lever on each side of drawer, pull up
on the left glide lever and push down on the right
glide lever (See Figure 1).
3. Pull the drawer away from the range.
To Replace the Drawer:
1. Pull the plastic slider to the front of the
glide slots on each side of the drawer cavity
(See Figure 2).
2. Align the glide on each side of the drawer with
the drawer cavity glide slot.
3. Push the drawer into the drawer cavity until
glide levers "click" (approximately 2"). If you do
not hear the glide levers "click" or the drawer
does not feel seated remove the drawer and
repeat steps 1 thru 3.
Left Glide
Push down
lever with
finger
Pull up lever
with finger
Lever
Lever
Right Glide
Figure 1
Figure 2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ei30gf45qsgEi30gf45qs

Table of Contents