Table of Contents
Advertisement
MESSAGE
ERROR
The water temp. is over 45˚C in delicate & wool course.
WATER TEMP.
H5
ERROR
(The thermistor wash is an inferior product or broke down.)
The heater wash dose not work.
HEATER WASH
H6
ERROR
(The water temp. doesn't rise over 2˚C during 15min.)
HEATER
WASH
H8
The heater worked without the water in the tub.
OVERHEATING
ERROR
IGBT
lb
The PCB ASS'Y is an inferior product.
ERROR
The drain pump filter is clogged.
The drain pump does not work during spin.
PUMP FILTER
PFE
ERROR
The large amount of detergent was used.
The drain hose is placed higher than 1m above the floor.
CAUSE
SOLUTION
Change the thermistor wash.
Change the heater wash.
Check the water level and the heater wash.
Change the PCB ASS'Y.
Clean the drain pump filter.
Change the drain pump.
Use the proper amount of detergent.
Place the drain hose 1m below the floor.
TROUBLESHOOTING GUIDE
65
Advertisement
Table of Contents
