Daewoo DWD-G1081TC Service Manual page 25

■
DWD-FC1X8X SERIES
Program selector
For switching the washing machine on and off and for selecting the programs.
You can select the course you want by rotating program selector.
For the more detailed information, please refer to the page 11~20.
Can be rotated in both direction.
You can turn off the power by rotating program selector to the direction at 12
o'clock.
Even if the program selector rotates while the program is running, the program is
not changed(except for off
Operation and temporary stop is repeated as it is pressed.
When you want to change program in operating;
press the 'Start/Hold' button
press the 'Start/Hold' button again.
Rinse+
• Is used to add a rinse, which may assist in removing traces of detergent residue.
• By selecting Rinse+ function, the rinse time and the rinse water are increased.
• Rinse+ option is selectable with all programs except Rinse, Spin and Drain
programs.
Rinse Hold
• This function leaves clothes in the machine suspended in the water after a rinse
without entering into spin.
• To proceed through to a drain or spin, after the Rinse Hold function is completed,
use program selector(Drain or Spin program).
• Rinse Hold option is selectable with all programs except Drain program.
).
select the program that you want to change
FUNCTIONS OF THE CONTROL PANEL 53