Table of Contents
Advertisement
Ø
Change basic dosage amount. ~ Page 37
Ø
²
– An additional changeable insert for a second detergent is
– When the i-DOS
– When thei-DOS
– Switching over the container contents requires an additional
36
If intensive foaming occurs repeatedly during washing, please
check the basic dosage setting and dosage strength.
Furthermore, some liquid detergents may have a tendency to
excessive foaming. If the basic dosage settings and dosage
strengths are correct, it is recommended to use a different
liquid detergent.
If required, convert i-DOS
Instead of softener, a second liquid detergent can also be
used in dispenser i-DOS
Change dispenser content. ~ Page 39
enclosed and can be fitted in the fill cover.
i
softener to detergent, the basic dosage amount of detergent
for this container is set to the factory setting (75 ml) and the
dosage for this detergent is set to off in all permitted
programmes. Then select the detergent dosage (light, normal
or strong) via the i-DOS
w
The i-DOS
container is automatically deactivated if the
detergent dosage is activated for the i-DOS
The settings are retained for this programme until the next
change.
i
softener, the basic dosage amount is set to factory setting
(36 ml) and the dosage is set to normal in all permitted
programmes.
acknowledgement via the display panel.
i
A change to the i-DOS content
resets the i-DOS
to their standard value.
Cancel
i
w
/
dispenser contents.
i
w
/
.
w
/
container content is switched from
i
w
/
button on the display panel.
w
/
container content is switched to
w
i
/
settings
i
w
/
container.
Continue
Advertisement
Table of Contents
