Osd (On Screen Display) Controls; Via Remote Control; Via Display Side Panel Buttons - Sceptre X328BV-SR Manual

OSD (On Screen Display) Controls

Via Remote Control

In order to adjust most of the options inside the On Screen Display (OSD), the picture
below shows all the buttons used on the remote control.
– This button opens the
OSD and also exits the OSD
by going to the previous
level of the OSD.
– This button exits the OSD
entirely.

Via Display Side Panel Buttons

In order to provide more than one type of OSD control buttons, the side panel's buttons
have also been made functional for adjusting the OSD.
/
1.
(OSD). If a sub-menu is active, pressing this button will exit the OSD. A
long press (or pressing and holding down the button for 2 seconds) will
activate the SOURCE menu, allowing the user to select various inputs of
the display. While the OSD is active, a long press would functions as
the enter button. Going into various options for adjustment.
CH(▲/▼) – These buttons functions as up/down direction in the OSD.
2.
VOL(+/-) – These buttons functions as left/right direction in the OSD or
3.
increases/decreases the value of an option.
– Press this button quickly to activate the On Screen Display
- 26 -
www.SCEPTRE.com
SCEPTRE X328BV-SR User Manual
▲ – This button functions as up
direction in the OSD.
▼ – This button functions as down
direction in the OSD.
◄ – This button functions as left
direction in the OSD.
► – This button functions as right
direction in the OSD.
ENTER – This button changes the
channel in conjunction with the
number pad and also functions as
ENTER for selecting options in the
OSD.