Advertisement
4. Once you press E N T E R ,The CHANNEL/FUNC-
TION display switches to C K C = M A N C A N C E L, this
allows you to select a manual or an automatic
alarm cancel , press the SCAN UP arrow or S C A N
D O W N arrow to toggle between A U T and M A N
Cancel. Press the E N T E R button to store your
selection.
CKC=MAN CANCEL
6 : 0 0
5. After you press ENTER, the CHANNEL/FUNCTION
display will change to CKL=COOK. To select an
alternate function (see list below) use the S C A N
U P or S C A N D O W N arrows. Press E N T E R to store
the selection. The function name selected will be
displayed during the final countdown sequence.
Note: The function name options are as follows:
BAKE, BAKE MORE, BASTE, BRAISE, CHILL,
COOK, COOK DUTY 1, COOK DUTY 2, COOK
DUTY 3, COOK MORE, COVER, DISCARD,
DONE, DROP, END, FOLD, FRY, FRY MORE,
GRILL, GRILL MORE, HOLD, HOLD DUTY, MIX,
POACH, POUR, REMOVE, ROTATE, SEAR,
SHAKE, SIDE 1, SIDE 2, STIR, TURN, WHIP And
WRAP.
CKL=COOK
6 : 0 0
6. After pressing the E N T E R button, the CHANNEL/
FUNCTION display will read CKT=COOK TIME.To
move on to the D U T Y function press the selected
CHANNEL BUTTON once.The CHANNEL/FUNC-
TION display reads DT1=DUTY TIME1 and :30
Seconds (The Factory Preset) will appear in the
TIME DISPLAY.
840-508revA
ENTER
7. To set the DUTY TIME Press the SCAN UP Arrow
Button. If no DUTY TIME is desired use the S C A N
D O W N Arrow Button to set the DUTY TIME to 0:00,
press E N T E R to store your setting.
8. Once you press E N T E R ,The CHANNEL/FUNC-
TION display switches to DT1=MAN CANCEL, this
allows you to select a manual or an automatic
alarm cancel , press the SCAN UP arrow or S C A N
D O W N arrow to toggle between A U T and M A N
Cancel. Press the E N T E R button to store your
selection.
ENTER
9. After you press ENTER, the CHANNEL/FUNCTION
display will change to DT1=COOK. To select an
alternate function (see list by step 5) use the
SCAN UP or S C A N D O W N arrows. Press E N T E R
to store the selection. The function name selected
will be displayed during the DUTY 1 sequence.
3
D1T=DUTY 1 TIME
0 : 30
DT1=DUTY TIME1
0 0 : 0 0
DT1=MAN CANCEL
0 : 0 0
Printed in USA 3/06 © 2006
ENTER
ENTER
ENTER
Advertisement
