Panasonic SA-AK630GC Service Manual page 25

Table of Contents

9.13.3. Disassembly and reassembly for mechanism base drive unit

Step 1 Remove 3 screws.

Step 2 Release the claw, and then remove the gear holder.

Step 3 Remove the belt and change gear spring.

NOTE:

Take care not to lose the change gear spring.

Step 4 Remove the pulley gear, change gear and UP/DOWN

gear.

NOTE:

Force the right guide bar of tray base manually not to move

upwards.

Step 4 Holding the disc tray manually, push the disc tray in the

direction of the arrow.

Step 5 Release the 2 claws, and then remove the bottom SW

P.C.B..

SA-AK63 0GC / SA-AK63 0GN

Table of Contents

Sa-ak630gn