Disassembly Of Power P.c.b - Panasonic SA-AK630GC Service Manual

· Replacement of Power Amplifier IC
Step 1 Desolder the terminals of Power Amplifier IC and
replace the component.
9.9.

Disassembly of Power P.C.B.

· Follow the (Step 1) - (Step 2) of Item 9.3 - Disassembly of Top Cabinet
· Follow the (Step 1) - (Step 6) of Item 9.4 - Disassembly of CD Lid
· Follow the (Step 1) of Item 9.5 - Disassembly of Rear Panel
· Follow the (Step 1) - (Step 3) of Item 9.6 - Disassembly of CD Mechanism Unit
· Follow the (Step 1) - (Step 2) of Item 9.7 - Disassembly of Main P.C.B.
Step 1 Remove the 2 screws fixed at heat sink.
Step 2 Remove 1 screw fixed at Power P.C.B..
Note:
Insulate the Power P.C.B. with insulation material to avoid short
circuit.
17
SA-AK63 0GC / SA-AK63 0GN