Samsung WA55A7700A Series User Manual page 21

Clearance requirement
This clearance requirement is applicable for washers only.
NOTE
• For the dryer's clearance requirement, see the dryer's user manual.
• If the washer and dryer have different clearance requirements, use the one with the
larger value.
Alcove or closet installations
Minimum clearance for stable operation:
Sides
1 in. / 25 mm
If both the washer and a dryer are installed in the same location, the front of the alcove
or closet must have two unobstructed air openings for a combined minimum total area of
72 in.² (465 cm²).
This clearance requirement is applicable for washer and dryer pair installation.
Side by side installation
A
A
B
C
D
Untitled-3 21 Untitled-3 21
Top Rear
21 in. / 533 mm 5.9 in. / 150 mm
A
1 in. (25 mm)
21 in. (533 mm)
1 in. (25 mm)
5.9 in. (150 mm)
Front
1 in. / 25 mm
B
C D
English 21
2021-07-14 2021-07-14 12:20:10 12:20:10