Table of Contents
Advertisement
Troubleshooting Internet Connectivity Issues
Troubleshooting wired Internet connectivity issues
No network cable found
Make sure that the network cable is plugged in. If it is connected, make sure that the router is turned
on. If it is on, try turning it off and on again.
IP auto setting failed
Do the following or configure the
1.
Make sure that the DHCP server is enabled on the router, and reset the router.
2.
If the problem persists, contact your Internet Service Provider.
Unable to connect to the network
1.
Check all
IP
Settings.
2.
Make sure that the DHCP server is enabled on the router. Then, unplug the router and plug it back
in.
3.
If this does not work, contact your Internet Service Provider.
IP Settings
manually.
Try now
Advertisement
Table of Contents
Troubleshooting
