Bosch KGN86AI4P Instructions For Use Manual page 15

Table of Contents

Advertisement

Available languages

Available languages

Manual connection with the home
network (WLAN)
If the WLAN router present does not
have a WPS function, or if this is
unknown, you can manually connect the
refrigerator with the home network.
1. Press the super button and the lock/
alarm off button simultaneously to
open the Home Connect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time.Button operation is locked
if only the lock/alarm off button is
pressed for a longer period. Press the
lock/alarm off button again until the
lock is deactivated.
2. Press the °C button repeatedly until
the displays SA and oF are shown.
3. Press the + button.
The appliance is ready for manual
connection.
The display shows an animation for
5 minutes.
Follow the steps below during this
period.
4. The refrigerator has now set up its
own WLAN network with the network
name HomeConnect.
You can now access this network with
your mobile device.
5. Open the settings menu of the mobile
device and call up the WLAN settings.
6. Connect the mobile device with the
WLAN network HomeConnect.
Password: HomeConnect
It can take up to 60 seconds to
establish the connection.
7. After successful connection, open the
Home Connect app on the mobile
device.
The app will search for the refrigerator.
8. As soon as the refrigerator has been
found, enter the network name (SSID)
and the password (Key) of your own
home network (WLAN) into the
corresponding fields.
9. Confirm with the button Transmit to
domestic appliances.
If the connection is successful, on
flashes in the refrigerator display.
You can now connect the
refrigerator with the app.
If the display shows oF, it was not
possible to establish a connection.
Enter the password again, ensuring
that it is spelt correctly.
Check whether the refrigerator is
located within the range of the
home network (WLAN).
Repeat the process.
Connecting the refrigerator to the Home
Connect app
Once the connection between the
refrigerator and the home network has
been established, you can connect the
refrigerator to the app.
1. Press super button and lock/alarm
off button simultaneously to open the
Home Connect menu.
The display shows Cn.
en
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kgn series

Table of Contents