Flush Mount Side Trim - Viking FBI7360 Installation Manual

Flush Mount Side Trim

After the unit has been placed in the cutout, leveled and all connections completed, the unit will need to be fastened
to the cabinetry. Open the door and remove the drawers. Using the fl at wood screws, fasten the unit to the cabinetry
on both sides. NOTE: Only use the screws provided and use caution when installing the fastening screws to
prevent scratching the frame. Use a 3" Phillips driver to prevent damage. Snap the fl ush mount side trim to the
side opposite the door swing. Replace the drawers and close the door.
Side trim is taped to the side unit.
Remove and snap to side opposite
door swing.
Attach unit to cabinetry on both
sides
18