Flush Mount Side Trim
After the unit has been placed in the cutout, leveled and all connections completed, the unit will need to be
fastened to the cabinetry. Open the door and remove the drawers. Using the fl at wood screws, fasten the unit
to the cabinetry on both sides. NOTE: Only use the screws provided and use caution when installing the
fastening screws to prevent scratching the frame. Snap the fl ush mount side trim to the side opposite the
door swing. Replace the drawers and close the door.
Snap fl ush mount side trim to
side opposite door swing.
Attach unit to cabinetry on both
sides
17
17