Searching For Digital Terrestrial; Tv Channels Manually - Grundig 22 VLE 4520 BF User Instructions

SPECIAL­SETTINGS
6 Select the line »Scan Typ« with »
and set the option »DTV« with »
7 Start the scan with »
– A ll channel and favourites lists will be
d eleted and compiled anew.
Note:
After starting the scan, a security query will
7
appear. Press »
option »Yes«.
– T he »Reults« menu appears, and the scan
for TV channels begins. Depending on the
number of television channels received,
this can easily take a few minutes.
– T he scan is complete as soon as the
» PROGRAM TABLE« appears.
Note:
You can abort the search by pressing
7
»EXIT«.
8 Press »EXIT« to end the setting.
Automatic­service­update­
If this function is activated, possible changes of
network operators are updated automatically.
The unit must be located in stand-by mode.
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP«
with » « or »
V Λ
confirm.
3 Select the line »Automatic Service Update«
with » « or »
V Λ
4 Select the automatic update with »
(»On«).
5 Press »EXIT« to end setting.
­ 4 8
ENGLISH
­ - ---------------------------------------------------------------------------------------------------------
« or »
V
<
« or »
« (red).

« (green) to confirm the

« and press »OK« to
«.
<
« or »
Searching­for­digital­terrestrial­
«
Λ
>
«.
TV­channels­manually
1 Open the menu with »MENU«.
2 Select the menu item »SOURCE SETUP« with
» « or »
V
– T he »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
and press »OK« to confirm.
Select the option »Air« with »
» « and press »OK« to confirm.
Λ
Caution:
The antenna power supply (line »Active
7
Antenna Power«) may only be switched on
if the antenna is an active indoor antenna
with a signal amplifier and it is not already
supplied with a voltage via a mains plug
(or similar supply). Otherwise you may
cause a short circuit and irreparably dam-
age your antenna.
4 Select the »Active Antenna Power«« with
» « or »
V
er supply for the antenna with »
(»On«).
5 Select » Digital Manual Tuning« with »
» « and press »OK« to confirm.
Λ
– T he menu appears.
6 Enter the channel number directly with
»
1­...­0
– A fter the search is complete, the channels
found are displayed in the »Results« menu.
7 Press »EXIT« to finish the setting.
>
«
« and press »OK« to confirm.
Λ
<
«. Switch on the antenna pow-
Λ
«.
« or » «
V Λ
>
«, » «, » « or
V
< >
« or » «
« or
V