Table of Contents
Advertisement
usBreCorDinG
recordingaprogrammefromthe
channellist
1 Open the »CHANNEL LIST« with »oK«.
2 Select a television channel with »
<
>
»
« or »
« and press »oK« to confirm.
3 Press »menu« to exit the channel list.
4 Press »
« to start recording.
– I nformation on the recording is displayed:
the recording symbol, the channel name,
the programme, the recording time and the
available memory space.
– A fter a short time this information disap-
pears.
5 Press »
« to stop recording.
7
6 Confirm the display with »
or
press »
« (red) to continue the recording.
presettingprogrammestobe
recorded
...usingtheelectronictvguide
You can use data from the electronic TV guide
for recording.
25 programmes can be preset for the timer
r ecording or as a reminder.
1 Press »GuiDe« to display channel informa-
tion.
– T he electronic TV guide appears.
2 Select the preferred channel with »
or »
«.
Λ
3 Switch to the information about the current
programme with »
4 Select the programme of your choice with
»
« or »
«.
v
Λ
5 Confirm the programme with »
– T he symbol »
of the programme, and the data has been
added to the timer.
3 2
ENGLISH
- -------------------------------------------------------------------------------------------------------------
«, »
v
« (green);
>
«.
«.
« appears after the name
note:
If the data for the recording is to be changed,
7
use »
switch to the »SCHEDULED EVENTS«, press
«,
Λ
»
« (green), change the data and save it with
»
« (green).
6 Press »exit« to exit the menu.
notes:
Before the timer recording begins, a warn-
7
ing message appears with a 20-second
countdown. You can switch over to the pro-
grammed television channel.
If the timer recording starts during playback,
7
playback is not interrupted: Recording takes
place automatically in the background as
long as you do not select »Yes« when the
timer countdown message is shown.
Note for UPC customers only: When a pro-
7
gram is recorded, it can happen that a part
of the previous or next program is included
in the recording schedule due to possible
electronic TV guide inaccuracies. Please be
advised that in this case, when one or more
of these programs are parental rated, the
highest access level will be applied for the
entire recording.
setthelead/follow-uptime
With this function you can change the recording
time set by the electronic TV guide.
If you think that a program will start a few min-
utes earlier or will end several minutes later, you
can „add" up to 60 minutes to this time
«
v
1 Display channel information with »GuiDe«.
2 Switch to the timer function with »
(yellow) and then select the »Personel
recording time edit« menu with »
3 Change the start time with »
4 Use »
« to switch to the »End« row and
v
change the end time with »
5 Save the setting with »
6 Switch off the program information with
»GuiDe«.
« (yellow) and »
<
« or »
<
« or »
« (green).
« (blue) to
«
« (green).
>
«.
>
«.
Advertisement
Table of Contents
