Table of Contents
Advertisement
To set the time how long you want the notification light
to blink, scroll to
Blink light for
To select whether you want to be notified of new short
messages, multimedia messages, e-mail messages, and
missed phone calls, scroll to
the joystick.
Standby mode settings
Select
Standby mode
and from the following:
Active standby
— Select
•
different applications available in the active standby
mode.
Left selection
key,
Right selection key
•
shortcuts that open from the left and right selection
keys in the standby screen. Press joystick, select a
function from the list, and OK.
Navigation key
right,
Navigation key
•
key
down,
Navigation key
key
— Change the shortcuts that open when you
scroll to different directions. These settings are not
available if you select
Active standby
Display settings
Select
Display
and from the following:
Brightness
— Adjust the amount of light required to
•
illuminate the device display.
Power saver time-out
— Select the amount of time
•
before the screen saver is activated. Activating the
screen saver lengthens the device operating time.
Light time-out
— Set how quickly after last keypress
66
•
the display dims.
Call settings
and press the joystick.
Select
•
Notified events
and press
•
On
to have shortcuts to
•
— Change the
•
left,
Navigat.
up,
Selection
•
> On.
•
•
•
•
Call
and from the following:
Send my caller ID
— Select
Yes
to display your phone
number to the person you are calling or
network
to let the network to determine whether
your caller ID is sent.
Call waiting
— Select
Activate
to be notified of a new
incoming call while you have a call in progress or
Check status
to check if the function is active on the
network.
Reject call with SMS
— Select
Yes
message automatically to the person who is calling
you informing why you cannot answer their
incoming call.
Message text
— Enter the text that is sent when you
cannot answer an incoming call and want to
automatically send a text message as a reply.
Automatic redial
— Select
On
to redial a number if it
was busy at the first call attempt. Your device makes
a maximum of 10 attempts to connect the call.
Summary after call
— Select
On
to briefly display the
approximate duration of the last call.
1-touch dialing
— Select
On
to activate speed dialing
on your device. To dial a phone number assigned to
the speed dialing keys (2-9), press and hold the key.
See "1-touch dial," p. 18.
Anykey answer
— Select
On
to answer an incoming
call by briefly pressing any key, except the end key.
Line in use
— Select
Line 1
or
Line 2
phone line for outgoing calls and text messages
(network service). This setting is displayed only if the
SIM card supports the alternate line service and a
subscription to two phone lines.
Set by
to send a text
to change the
Advertisement
Table of Contents
