Table of Contents
Advertisement
Calls and voice applications
When the device is locked, calls still may be possible to
the official emergency number programmed into your
device.
Make calls
In the offline profile, you may need to enter the lock
code and change the device to a calling profile before
making any call, including a call to an emergency
number.
To make and receive calls, the device must be switched
on, the device must have a valid SIM card installed, and
you must be located in a service area of the cellular
network.
Enter the phone number, including the area code, and
press the call key. If you enter an incorrect character,
press the clear key.
Tip: For international calls, press the * key
twice to add the + character that replaces the
international access code, and enter the
country code, area code (omit the leading 0, if
necessary), and phone number.
To end the call or cancel the call attempt, press the end
key.
To make a call using the saved contacts, select
Contacts
in the standby mode. Enter the first letters of
the name, scroll to the name, and press the call key. See
18
"Contacts," p. 26.
Press the call key to view up to 20 numbers that you last
called or attempted to call. Scroll to the desired number
or name, and press the call key to dial the number. See
"Log," p. 20.
Use the volume keys to adjust the volume of an active
call.
To call your voice mailbox (network service) in the
standby mode, press and hold 1; or press 1 and then the
call key.
1-touch dial
1-touch dialing allows you to make a call by pressing
and holding a number key.
Before using 1-touch dialing, select
Settings
Call
1-touch dialing
> On.
>
>
To assign a number key to a phone number, select
Menu
Tools
1-touch
dial. Scroll to the number key
>
>
(2 - 9) on the screen, and select
Options
the desired number from the
Contacts
To delete the phone number assigned to a number key,
scroll to the speed dialing key, and select
Remove.
To modify a phone number assigned to a number key,
scroll to the 1-touch dialing key, and select
Change.
Menu
Tools
>
>
> Assign. Select
directory.
Options
>
Options
>
Advertisement
Table of Contents
