Nokia RM-570 User Manual page 15

Hide thumbs Also See for RM-570:
Table of Contents

Advertisement

2
To activate Bluetooth connectivity
select
Bluetooth
> On.
that Bluetooth is active.
3
To connect your phone with an audio
enhancement, select
Connect audio
enhan.
and the device that you want
to connect to.
4
To pair your phone with any
Bluetooth device in range, select
Paired devices
Add new
>
Scroll to a found device, and select
Add.
Enter a passcode (up to 16 characters)
on your phone and allow the
connection on the other Bluetooth
device.
If you are concerned about security, turn
off the Bluetooth function, or set
phone's visibility
to Hidden. Accept
Bluetooth communication only from
those you trust.
PC connection to the internet
Use Bluetooth technology to connect your
compatible PC to the internet without PC
Suite software. Your phone must have
activated a service provider that supports
internet access, and your PC has to support
Bluetooth personal area network (PAN).
After connecting to the network access
point (NAP) service of the phone, and
pairing with your PC, your phone
automatically opens a packet data
connection to the internet.
Packet data
General packet radio service (GPRS) is a
network service that allows mobile
phones to send and receive data over an
internet protocol (IP)-based network.
To define how to use the service, select
Menu
Settings
Connectivity
>
>
www.nokia.com/support
Cyan
Cyan
Magenta
Magenta
Make it your phone
Packet data
Packet data conn.
>
from the following options:
indicates
When needed — to set the packet data
connection to established when required
by an application. The connection will be
cut when the application is closed.
Always online — to automatically
connect to a packet data network when
you switch the phone on
device.
You can use your phone as a modem by
connecting it to a compatible PC using
Bluetooth technology or a USB data cable.
For details, see Nokia PC Suite
documentation. See "Nokia
support", p. 35.
USB data cable
You can use the USB data cable to transfer
My
data between the phone and a compatible
PC or a printer supporting PictBridge.
To activate the phone for data transfer or
image printing, connect the data cable
and select the mode:
PC Suite — to use the cable for Nokia PC
Suite
Printing & media — to use the phone
with a PictBridge compatible printer or
with a compatible PC
Data storage — to connect to a PC that
does not have Nokia software and use the
phone as data storage
To change the USB mode, select
Settings
Connectivity
>
cable
and the desired USB mode.
Synchronisation and backup
Select
Menu
Settings
>
backup
and from the following:
Phone switch — Synchronise or copy
selected data between your phone and
>
Yellow
Yellow
Black
Black
15
and
Menu
>
USB data
>
Sync and
>
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

6600i slide

Table of Contents