Table of Contents
Advertisement
2
MbN: Select a base unit number. a MOKN
R This number is used by the handset as
a reference only.
3
Base unit:
Press and hold M
4
Handset:
MOKN a Wait until "Base PIN" is
displayed. a Enter the base unit PIN
(default: "0000"). a MOKN
R If you forget your PIN, contact an
authorised service centre.
Selecting a base unit
When "Auto" is selected, the handset
automatically uses any available base unit it is
registered to. When a specific base unit is
selected, the handset makes and receives
calls using that base unit only. If the handset is
out of range of that base unit, no calls can be
made.
1
M
N#137
2
MbN: Select the desired base unit number,
or "Auto". a MOKN
Important:
R When viewing the phonebook, caller list,
etc., only the entries that are stored in the
base unit that the handset is currently
connected to are displayed.
Deregistering a handset
1
M
N#131
2
MOKN
3
MbN: "Yes" a MOKN a M
Cancelling a base unit
A handset can cancel a base unit that it is
registered to. This allows the base unit to end
its wireless connection with the system.
1
M
N#139
2
MbN: Select the base unit you want to
cancel. a MOKN
3
MbN: "Yes" a MOKN a M
TGE610HK(en_en)_0817_ver030.pdf 31
Increasing the range of the base
unit
You can increase the signal range of the base
unit by using a DECT repeater. Please use
N for about 5 seconds.
only the Panasonic DECT repeater noted on
page 3. Contact your Panasonic dealer for
details.
Important:
R Before registering the repeater to this base
R If you want to register 2 or more repeaters
Setting the repeater mode
1
2
Registering the DECT repeater
(KX-A405/KX-A406) to the base unit
Note:
R Please use a repeater that has not yet been
1
2
N
3
N
Programming
unit, you must turn the repeater mode on.
to the base unit, contact an authorised
service centre.
M
N#138
MbN: Select the desired setting. a MOKN
a M
N
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the
DECT repeater.
Base unit:
Press and hold M
N for about 5 seconds.
DECT repeater:
Connect the AC adaptor, then wait until
the
indicator and
indicator light
green.
Base unit:
To exit the registration mode, press M
N.
31
2018/08/24 8:12:11
Advertisement
Table of Contents
