D-Link DIR-863 User Manual page 32

Step 3: Internet Connection (Dynamic IP Address)
After selecting the Dynamic IP Address Internet connection method, the following page will appear.
The following parameters will be available for configuration:
MAC Address: Enter the MAC address of the Internet gate-
Clone Button: If the configuration PC also acts as the Inter-
Host Name: Enter the host name used here. You may also
Primary DNS Address: Enter the Primary DNS IP address used here.
Secondary DNS Address: Enter the Secondary DNS IP address used
Click Next to continue.
Step 3: Internet Connection (PPPoE)
After selecting the PPPoE Internet connection method, the following
page will appear:
The following parameters will be available for configuration:
User Name: Enter the PPPoE account user name used here.
Password: Enter the PPPoE account password used here.
Click Next to continue.
D-Link DIR-862L User Manual
way (plugged into the Internet port of this
device) here.
net gateway, then click on the Copy Your PC's
MAC Address button to copy the PC's MAC
address into the space provided. If you're not
sure, leave the MAC Address field blank.
need to provide a Host Name. If you do not
have or know this information, please contact
your ISP.
here. This field is normally optional. Only
one DNS address is required for a functional
Internet connection, but using a second DNS
address provides more stability.
This information is given by the ISP.
This information is given by the ISP.
28