Connecting To A Pc - LG DM2382D Owner's Manual

28
MAKING CONNECTIONS

Connecting to a PC

Your TV supports the Plug & Play* feature and has the built-in speakers with Infinite Surround that
reproduces sound clearly with a rich bass.
* Plug & Play: The function when a PC recognizes a connected device that users connect to a PC and turn
on, without device configuration or user intervention.
NOTE
y
It is recommended to use the TV with the HDMI connection for the best image quality.
y
If you want to use an optional external speaker instead of the built-in speaker, set the TV speaker
feature to off .
y
If you do not use an optional external speaker, connect the PC to the TV with the optional audio
cable.
y
If you turn the TV on when the set becomes cold, the screen may flicker. This is normal.
y
Use a shielded signal interface cable, such as D-sub 15 pin signal cable and DVI to HDMI cable, with
a ferrite core to maintain standard compliance for the product.
y
Some red, green, or blue spots may appear on the screen. This is normal.
y
Connect the signal input cable and tighten it by turning the screws
clockwise.
y
Do not press the screen with your finger for a long time as this may
result in temporary distortion on the screen.
y
Avoid displaying a fixed image on the screen for a long period of time
to prevent image burn. Use a screensaver if possible.
NOTE
y
If you want to use HDMI-PC mode, you must set the input label to PC mode.
y
The OSD (On Screen Display) is displayed on the screen as shown below.
» When turning the product on in HDMI input.
» When switching to HDMI input.
» When connecting an HDMI cable with no signal.
Is the input connected to your PC?
Yes
Do not show message again.
y
If you select "Yes" the size and image quality are optimised for your PC.
y
If you select "No" the size and image quality are optimised for the AV device (DVD player, set-top
box, gaming device).
y
If you select "Do not show message again" this message does not appear until the TV is reset. You
can change the set value in SETTINGS
y
The values set for HDMI1/HDMI2 are saved independently.
No
INPUT Input Label.