Table of Contents
Advertisement
G Before the Junction Map is displayed,
a voice guidance will be heard at
approx. 600 m or 0.4 miles (2 km or
1.3 miles for a motorway) from the
next guidance point. You can change
this setting by setting the Junction
Guidance Settings.
1
23
1 Remaining distance indication:
Indicates the remaining distance
to the next guidance point with the
bar gauge.
2 Guidance route: Indicates the
direction to travel.
3 Guidance point:Indicates the next
guidance point.
■Turn list on Route
The screen is always divided into
two displays and the Turn List on
Route is displayed on the left display
if Turn List is activated. The Turn List
contains the guidance points next to
the vehicle position, and will change
while travelling.
When you get near to the next guid-
ance point, the left display is auto-
matically changed to the Junction
Map.
You can set to display the Turn List
screen always in the route guidance
mode.
1
2
1 Turn List:The list of the guidance
points and turning directions are
displayed from the items near to
the vehicle position, and it will
change while travelling.
2 Scrolling key:Scrolls the Turn List
on Route screen.
About the Voice Guidance
After starting the route guidance,
not only guidance by screen but also
guidance by voice, such as the turn-
ing direction or the distance to the
guidance point, will be given when
you get near to the guidance point.
You can set whether to use the voice
guidance or not, and set the volume
to be changed according to the vehi-
cle speed.
Changing/Editing the Route
Settings
From the Route menu, editing the
current route, confirming the route
information, setting the conditions
of the route calculation, etc. can be
performed.
Press [MENU] button on the panel.
1
Touch
to enter Route menu
2
screen when a route had exist.
29
Advertisement
Table of Contents
