Safety National Conventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of your computer system.
Power The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature.
Installation Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product.
Cleaning Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface.
Other If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation. Do not knock or drop the monitor during operation or transportation.
Contents in Box Monitor Warranty Card Stand Base CD Manual HDMI Cable USB Cable DP Cable Power Cable Not all signal cables will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.
Adjusting Viewing Angle For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. Hold the stand so you will not topple the monitor when you change the monitor’s angle. You are able to adjust the monitor as below: -5°...
Connecting the Monitor Cable Connections In Back of Monitor and Computer: 1. USB3.2 Gen1+charging 2. USB3.2 Gen1 3. USB-PC(USB upstream) 4. USB3.2 Gen1 5. Power 6. HDMI x 2 7. DP 8. Earphone Connect to PC 1. Connect the power cord to the back of the display firmly. 2.
5. Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for instructions on attaching it to the wall. Noted: VESA mounting screw holes are not available for all models, please check with the dealer or official department of AOC. 0° 90°...
Adjusting Hotkeys Source/Exit Clear Vision/< Volume/> Menu/Enter Power Power Press the power key to turn on/off the monitor. Menu/Select Activate the OSD menu or function adjustment confirmation. Volume / increase When the OSD menu is closed, press the “>” key to open the volume adjustment bar, and press the “<” or “>” key to adjust the headphone output volume.
Page 14
Clear Vision 1. When there is no OSD, Press the “<” button to activate Clear Vision. 2. Use the “<” or “>” buttons to select between weak, medium, strong, or off settings. Default setting is always “off”. 3. Press and hold “<” button for 5 seconds to activate the Clear Vision Demo, and a message of “Clear Vision Demo: on” will be display on the screen for a duration of 5 seconds.
OSD Setting Basic and simple instruction on the control keys. PIP Setting Color Setup Picture Boost OSD Setup Game Setting Extra Exit Luminance Contrast Gamma Gamma 1 Brightness HDR Mode Eco Mode Standard 1). Press the MENU-button to activate the OSD window. 2).
Luminance PIP Setting Color Setup Picture Boost OSD Setup Game Setting Extra Exit Luminance Contrast Gamma Gamma 1 Brightness Eco Mode Standard HDR Mode Contrast 0-100 Contrast from Digital-register. Brightness 0-100 Backlight Adjustment Standard Standard Mode Text Text Mode Internet Internet Mode Game Game Mode...
Color Setup Color Setup PIP Setting Picture Boost OSD Setup Game Setting Extra Exit Luminance LowBlue Mode Color Temp. Warm DCB Mode Green DCB Demo Blue Warm Recall Warm Color Temperature from EEPROM. Normal Recall Normal Color Temperature from EEPROM. Cool Recall Cool Color Temperature from EEPROM.
Picture Boost PIP Setting Picture Boost OSD Setup Extra Exit Luminance Game Setting Color Setup Bright Frame Brightness H. Position Frame Size Contrast V. Position Bright Frame On or Off Disable or Enable Bright Frame Frame Size 14-100 Adjust Frame Size Brightness 0-100 Adjust Frame Brightness...
OSD Setup PIP Setting Extra Exit Luminance OSD Setup Game Setting Color Setup Picture Boost Language English H. Position Transparence V. Position Timeout Break Reminder DP Capability Language Select the OSD language Timeout 5-120 Adjust the OSD Timeout If the DP video content supports DP1.2, please select DP Capability 1.1/1.2 DP1.2 for DP Capability;...
PIP Setting Game Setting PIP Setting Extra Exit Luminance Picture Boost OSD Setup Color Setup Size Small Swap Main Source Position Right-up Sub Source Audio HDMI1 PIP Setting Off / PIP / PBP Disable or Enable PIP or PBP. Main Source HDMI1 、HDMI2 、DP Select main screen source.
Game Setting Extra Exit Luminance Picture Boost OSD Setup Game Setting Color Setup PIP Setting Game Mode Frame Counter Game Color Dial Point Shadow Control Overdrive Adaptive-Sync Low Input Lag No optimization by Smart image game For playing FPS (first Person Shooters) games. Improves dark theme black level details.
Extra Exit Picture Boost OSD Setup Extra Luminance Color Setup PIP Setting Game Setting Input Select Auto DDC/CI Resolution : 3840(H)X2160(V) Off Timer Reset H. Frequency : 133 KHz Image Ratio Wide V. Frequency : 60 Hz Input Select Auto/HDMI1/HDMI2/DP Select Input Signal Source Off Timer 0-24hrs...
Press to auto-adjust. Please refer to Regulation & Service Information which is in the CD manual Regulation & Service or www.aoc.com (to find the model you purchase in your country and to find Regulation & Service Information in Support page.
Specification General Specification Model name U32P2 Driving system TFT Color LCD Panel Viewable Image Size 80 cm diagonal Pixel pitch 0.1816mm(H) x 0.1816mm(V) Horizontal scan range 30k-140kHz Horizontal scan Size(Maximum) 697.306mm Vertical scan range 40-60Hz Vertical Scan Size(Maximum) 392.234mm Max resolution...
Pin Assignments 19-Pin Color Display Signal Cable Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name TMDS Data 2+ TMDS Data 0- DDC/CEC Ground TMDS Data 2 Shield TMDS Clock + +5V Power TMDS Data 2- TMDS Clock Shield Hot Plug Detect TMDS Data 1+ TMDS Clock-...
Plug and Play Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.