Cl1000M / Cl1000N Installation - ATEN CL1000N-FR User Manual

CL1000M / CL1000N Installation

Refer to the installation diagram as you perform the installation steps. The
numbers in the diagrams correspond to the numbers of the steps.
1. Plug the SPHD connector end of the KVM cable provided with this unit
into the CL1000M / CL1000N's KVM port.
2. Plug the keyboard, monitor, and mouse connectors of the KVM cable
provided with this unit, into the 5 in 1 console cable that connects to the
console section of the KVM switch.
Note: Supports PS/2 or USB KVM switches. Supports computers with PS/2
or USB keyboard and mice.
3. Plug the power cord into the CL1000M / CL1000N's power socket and
into an AC power source and power up your KVM LCD console.*
Note: Use the Power Switch on the CL1000M's rear panel to turn the unit on.
4. Power up your KVM installation.
3
CL1000N
1
e.g., CS1716A
4
2
Chapter 2. Hardware Setup
13